General information to fulfill the law (34/2002, 11th) about the society’s information & electronic commerce. We indicate our general information data of the website.
- Domain name: www.brahmspain.com
- Owner of the website: BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A.
Tax identification number: A78785318
- Complete postal address:
- Polígono Industrial Calle D 13200 MANZANARES (C. REAL), ESPAÑA
Contact: Tel.: (+34) 926647414 Fax: (+34) 926620674
CONDITIONS OF USE OF THE WEBSITE
1.- PROPERTY, RESPONSIBLE USE AND PURPOSE OF THE WEBSITE.
The fact of accessing this website implies knowledge and acceptance of the following terms and conditions of use of its content, as well as the acceptance of the established policy on data protection when personal data or third parties are provided. , and attributes the condition of the user of the Portal and access to it implies to accept it without reservations.
Unless otherwise indicated, access to the information shown on the portal pages is completely free.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A., owner of the website, reserves the right to make at any time and without prior notice, modifications and updates of the information contained on its website or in the configuration and presentation of it.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. does not guarantee the absence of errors in the access to the web, content or update. However, it will use all means to solve, correct or update them.
The access to this website and the use of that may be made of the conteined information under the responsibility of the person who carries it out. BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. shall not be liable for any consequence, malfunction, damage or harm that may arise from such access or use of information beyond their control.
The user will assume all expenses, costs and indemnities that may arise from processes initiated against him for breach of the provisions of the conditions of use.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. is not responsible for the status of the access connection or the contents of the links of third parties referred to on the web.
The data corresponding to the ownership of the website and that comply with article 10 of the LSSI can be found in the Legal Notice section located at the bottom of this website.
The purpose of this website is as described below: to inform users of the services and products offered by BRAHM PRECISION PRODUCTS CORPORATION SPAIN SA, to provide the information that users request and to send the newsletter to users who register and request in case of offering this service, as well as, where appropriate, receipt of curriculum vitae from users who wish to send it to BRAHM PRECISION PRODUCTS CORPORATION SPAIN.
2.- INTELLECTUAL AND INDUSTRIAL PROPERTY.
All rights of Industrial and Intellectual Property are reserved for the elements that make up the graphic design of your website, menus, navigation buttons, HTML code, Java or Java Script applets, Actives controls, texts, images, textures, graphics and any other content of the «web site» or, in any case, has authorization for the use of said elements.
Likewise, BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. owns the industrial property rights derived from the use of trademarks, distinctive signs and commercial names, except those corresponding to sponsors, sponsors, advertisers, etc., that may appear on this website, as well as those corresponding to links that may be made from this web page.
Photographs that may appear on the website or through links to other pages, may not be used by the user for any purpose, without the authorization of its owner. The improper use of the same by the user will make him / her liable only against BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. and against third parties, of the damages caused as well as legal breaches that may arise from the use thereof.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. reserves the rights of reproduction, modification, adaptation, public communication, maintenance, correction of errors, assignment, sale, rental, loan and / or any other right of intellectual or industrial property that may correspond to the contents of the web site. Any exercise of the foregoing rights, regardless of the medium or form in which they were produced, requires prior written authorization from BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A.
In any case, BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. is responsible for possible infractions that intellectual and industrial property may be committed by any user of the website.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. reserves the right to modify the content and elements that make up its website, without having to communicate it previously, when it deems appropriate in accordance with the exercise of its services.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. is not responsible for the integrity and veracity of the content of the links to the websites that can be accessed from its website.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. It makes available to users a group of professionals in charge of updating and reviewing the veracity and integrity of the content of the information provided on the website.
However, BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. excludes any liability that may arise from the contents of the content and the contents of the same website.
3.- PERSONAL DATA.
In compliance with the provisions of the data protection regulations we inform you of the following aspects:
Identity of the Data Processor:
- Identity: BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A
- Address: POLÍGONO INDUSTRIAL CALLE D MANZANARES (CIUDAD REAL) SPAIN
- Telephone: (+34) 926647414
- Email: email@example.com
Content and acceptance:
The user is informed of the treatment and protection of personal data collected through the Website, so that they can determine freely and voluntarily if they wish to provide their personal data through this Website. The access and use of the Website implies full acceptance by the User of this Personal Data Processing document and is obliged to fulfill with the terms and conditions contained in it. Therefore, the User must carefully read this Personal Data Processing document in each of the occasions in which he / she intends to use the Website, as it may be modified. The present document of Treatment of Personal Data will be valid only for the personal data obtained in the Web Site, not being applicable for that information gathered by third parties in other web pages, even if these are linked by the Web Site.
Finality of data processing:
Manage the navigation of the User through the Website, as appropriate, as well as for the purposes indicated in each of the forms enabled on the Website.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. will treat the personal data provided by the user through the printed forms or by email, in order to respond to the requests sent, manage the c.v. You can receive, as well as send information related to our products and services. Use the entity, where appropriate, your information to be able to assume the products purchased and perform the billing of them. The confidentiality of the personal data provided and compliance with all applicable regulations is guaranteed. All data is online and has been registered. Also, users are over 14 years old.
Likewise, by clicking on the «Send» button (or equivalent) included in the aforementioned forms, the User declares that the information and data in them has provided the exact and truthful information.
The data provided will be kept as long as the commercial relationship is maintained or during the years necessary to comply with the legal obligations.
In the event that personal data are provided, by persons who do not own them, the user must, with character, include their inclusion, inform the persons with the ends in the previous paragraphs. In these cases, the user guarantees that the information reported is over 14 years old and that the information is accurate and truthful. BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. will be exempt from any requirement for the breach by the user of these requirements.
Legitimacy for the data processing:
The legal basis for the data processing is the legitimate interest to respond to requests sent by you.
Likewise, express consent is requested for those purposes not contemplated in the previous cases, such as the sending of commercial information. To give your consent, through the box that will appear on the data collection forms, BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. could contact the User by ordinary mail, email, SMS, or any other means of electronic communication, to send commercial communications related to the products and / or services we offer.
If at any time the User does not wish to continue receiving communications of this nature, you may revoke your consent by sending the notification to the following address firstname.lastname@example.org , providing a copy of a document that allows to prove your identity, or well using the link enabled for this purpose in the commercial communications you receive.
You can revoke the consent for the processing of your data, at any time at the address email@example.com.
Communication or Data Transfer and International Data Transfers:
The personal data of the User will not be communicated to third companies without informing and obtaining their prior consent, unless there is a legal requirement. Said information will be found in the different forms of data collection, offering previously to the User the possibility of accepting or not the assignment, according to the purpose. There are no international data transfers.
Anyone has the right to obtain confirmation about whether BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. We are processing personal data that concern you, and in such case, right of access to your personal data, for the purposes of processing, and to the categories of personal data in question.
Likewise, you will have the right to request the rectification of the inaccurate data or, where appropriate, request its deletion when, the data are no longer necessary for the purposes that were collected; the consent on which the treatment is based or against the treatment has been withdrawn; personal data have been treated unlawfully; or must be abolished for the fulfillment of a legal obligation established in the law of the Union or of the Member States.
You can request the limitation of the processing of your data when, challenge the accuracy of the personal data during the period that allows the responsible to verify the accuracy of the same; the treatment is unlawful and the interested party opposes the deletion of personal data and requests instead the limitation of its use; the person in charge no longer needs the personal data for the purposes of the treatment, but the interested party needs them for the formulation, the exercise or the defense of claims; or the interested party has opposed the treatment, while verifying if the legitimate reasons of the person in charge prevail over those of the interested party. In such cases, we will only keep the data for the exercise or defense of claims.
In certain circumstances and for reasons related to your particular situation, you may object to the processing of your data. BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. will stop processing the data, except for compelling legitimate reasons, or the exercise or defense of possible claims.
You will have the right to receive the personal data that concern you, and that you have provided, in a structured format, and to transmit them to another person responsible for the treatment without being prevented by the person responsible to whom you have provided them, when the treatment is based on the consent ; or the treatment is carried out by automated means.
When the affected persons exercise the rights of access, rectification, deletion and opposition, limitation of the treatment, portability of data and not to be subject to automated individualized decisions, they must communicate it by email to the address firstname.lastname@example.org
If you consider that your personal data has not been treated in accordance with the regulations, you can contact email@example.com You can also submit a claim to the Spanish Data Protection Agency, especially when you have not obtained satisfaction in the exercise of your rights, through the electronic headquarters at www.aepd.es.
The personal data we process at BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. come from the interested party and are facilitated through the forms provided on the website.
The personal data that BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. can collect through the Website or through the various communications you have with the User will be processed with absolute confidentiality, committing BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. to keep a secret about them and guaranteeing the duty of keeping them by adopting all the necessary measures to prevent their alteration, loss, processing or unauthorized access, in accordance with the provisions of the applicable legislation.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. has implemented and maintains the appropriate security levels to protect the personal data of the User against accidental losses and unauthorized accesses, treatments or disclosures, taking into account the state of the technology, the nature of the stored data and the risks to which are exposed.
4.- LYNKS POLICY.
The establishment of any link from an external web page, to any of the pages of this website will be made according to the following conditions:
No reproduction, either total or partial, of any of the services contained on this website is permitted.
No false, inaccurate or incorrect statements about the pages of this website and its services will be included.
BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. will not be responsible for the contents, information, statements, opinions or services made available to the public on the website from which a hyperlink to this website is established.
Any link will be made to the main page of this website.
In the event that they exist, the hyperlinks of this website have been previously validated with the owners of the linked websites, and BRAHM PRECISION PRODUCTS CORPORATION SPAIN S.A. of the activities carried out by users on these linked pages, especially in cases where they are contrary to law, morals and public order.
5.- VALIDITY OF THE CONDITIONS OF USE.
6.- NULLITY AND EFFECTIVENESS OF THE CLAUSES.
If any clause included in these conditions is declared totally or partially null or ineffective, such nullity will affect only that provision or the part of it that is null or ineffective, subsisting in all other conditions.
7.- APPLICABLE LAW AND JURISDICTION.